Chassis dyno HP is a mystery to me . I know it is measured at the tires and more actual, but how does it compare to HP at the crank? Your set up sounds to me like it would be putting out about 425 engine HP. Is your engine putting out as much HP as expected? Tuneing or launch is about all I can think of to get it faster..........................MO
{Steve Mick} http://stevemick.shutterfly.com/pictures#Part%202----- Original Message ----- From: "Donald Gallimore" <dongallimore@xxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx> Sent: Wednesday, September 01, 2010 4:38 AM Subject: Re: Pinks All Out & Akron Don The engine is a 30 over 440. It has an AED (Holley) 850 cfm mechanicalsecondaries, Torker 2 intake and Doug's 1 3/4" headers. Cam is a Comp 545 lift
with 285/297 duration (grind 21-228 3 bolt). Head are 452 castings with oversized valves and a stage one porting by Koeffles that really woke up themotor. Compression is a true 9.5 so it runs on 93 octane. 4.10 dana on 3800# SS
Springs and a snubber.I chassis dynoed it a couple of weeks ago and hit 360 HP at 5500 and 463 torque at 3600 rpm. HP is over 300 from 3500 to over 6400 rpm. Weight is 3680 plus a
195# driver. I think a tank is lighter than this thing. If you weren't able to load the YouTube video, search on YouTube for "DonGallimore" and you will find two different videos. One dated 2011 and another 2010 - they are the same run from two different cameras. The 2010 version shows
Rich Christensen's antics on the starting line. He really moves around. Akron Don Gallimore ----- Original Message ----
From: MO ( Steve Mick) <micher@xxxxxxxxxxxxxxx> To: 1962to1965mopars@xxxxxxxxxx Sent: Wed, September 1, 2010 1:32:19 AM Subject: Re: Pinks All Out & Akron Don Hay Don, I really enjoy seeing list members videos.What engine and equipment or approx. horesepower do you have? I would assumeSS springs?...............MO {Steve Mick} http://stevemick.shutterfly.com/pictures#Part%202----- Original Message ----- From: "Donald Gallimore" <dongallimore@xxxxxxx>To: <1962to1965mopars@xxxxxxxxxx> Sent: Tuesday, August 31, 2010 8:23 PM Subject: Pinks All Out & Akron DonRan Pinks All Out at Summit Raceway Park (Norwalk) last weekend. This is my final qualifying run on Rich's arm drop. Guy in the other lane was a littlewired as he jumped the drop. Made us both back up and restage so that they could restart the R/T clocks. I beat him off the line by .300 and then out
ET'd
him by a mere .012 seconds. My run was a best ever 12.265 @ 109.94. 60 foot at1.70. Very happy with my performance. Here's my run: http://www.youtube.com/watch?v=R1dq0ZqmxQEAfter looking at the run, I appreciate any comments and suggestions on where
to
go to get that last .25 seconds so I can have a sub 12 second street car. NoNOS!One thing I find intreging is that they tell you to set the pinion snubber at 1/2 inch off the floor for an automatic but this thing obviously in preloaded before it leaves the line. I'm hold the RPMs at 1500 on the line. Also, notice the two different rises on the back of the car on the two staging attempts.Thanks. Akron Don Gallimore ----Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volumeof mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopa------------------------------------------
---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines:http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.