Re: Exhaust manifolds
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Exhaust manifolds



the water jackets are on both ends of the heads, use anti-seize on the non-water jackets. use sealant on the water jacket ports.         jeff





--- On Sun, 8/29/10, Scott Mirabella <jmirab2972@xxxxxxxxxxx> wrote:

> From: Scott Mirabella <jmirab2972@xxxxxxxxxxx>
> Subject: Exhaust manifolds
> To: 1962to1965mopars@xxxxxxxxxx
> Date: Sunday, August 29, 2010, 5:47 PM
> 
> Hey,
> I got my exhaust manifold mounting stud kit from Mancini.
> Which studs 
> got into the water jackets? Should I use anything special
> on the 
> non-water studs (anti seize ect.)? Thanks for any help you
> can give!
> 
> Scott Mirabella
> 1964 Fury Convertible
> 383 4speed
> LongIsland, NY
> 
> 
> ----
> Please address private mail -- mail of interest to only one
> person -- directly to that person.  I.e., send
> parts/car transactions and negotiations as well as other
> personal messages only to the intended recipient, not to the
> Clubhouse public address. This practice will protect your
> privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
> 
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> 
> 
> 





Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.