RE: Flywheel cracks
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Flywheel cracks



Sorry for the blank post. Here's what I meant to ask: I just had my 
bigblock flywheel turned to install a new clutch and there are some 
small heat cracks in it due to the old clutch slipping. There'ye not 
bad, but do you guys think it's still useable? The car is a 64 Polara 
with a warmed up 426 wedge, 4-spd OD and 3:91 gears. I thrash on it 
regularly, but it will probably never see the track. The machinist said 
it wasn't that bad and turned it, but didn't charge me. He didn't say 
whether he'd use it or not.

Jeff Adams wrote:
> 
> 
> 
> Jeff Adams
> 64 Polara



Jeff Adams
64 Polara


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.