Heater controls
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Heater controls



I just installed a good used heater box in my 64 Polara, and I think the 
end of the lever on the water control valve where the cable connects was 
broken off, so I drilled a hole in it to attach the cable. Now that is't 
all back together, I'm not getting hot air from the heater no matter 
which button is pushed or which way the temp control lever is pointing. 
What am I missing here?

Jeff Adams
64 Polara


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.