Re: Lots Of Small Holes

["Gary H." <spigot2039@xxxxxxxxxxx>]

POR makes a fabric cloth designed specifically to use with their product. You may want to try that.  

Thanks,
Gary H. 

-----Original Message-----
>Herb et al,  I used the woven fiberglass cloth and resin . But this time, I 
>will put tape on the underneath side of the floors where the holes are, to 
>keep drips from coming thru. Then I will give a good thick coat of something 
>like POR 15 and lay some of that fiberglass cloth into it while still wet 
>and then another coat of POR 15 over the top.  I am hoping it will dry clear 
>through.  On woven fiberglass cloth--If you have dips ot ridges ( like 
>reinforcement beads) , cut your cloth on the bias and lay it into the bead 
>so the cloth grain is at an angle to the bead. It will follow the contour 
>better that way ....................MO 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.