RE: 8 3/4 yokes

[Doug Jacobsma <big_jake57@xxxxxxxxxxx>]

I don't know if this got answered or not, so forgive me if this is redundant.
 
the small yoke was the 7260, 29 or 10 spline.  2 1/8 inch inside yoke
the large yoke is the 7290, 10 spline.  2 5/8 inch inside yoke 

You can see either from 62 to 72, but pretty much the 742 has the smaller
yoke, while the 489 case has the larger yoke.  '69 and later had the tapered pinion.  
Small pinion is 1 3/8 inch diameter, large has 1 3/4 inch, tapered is 1 7/8 inch.

There are u-joints available to adapt one size yoke to the other size drive shaft if you don't want to replace the yoke.  Ofcourse if you use a center section from a C body like I did,  thats a whole new ball game and you WILL be replacing the yoke.
Hope this helps.

Jake
'63 Sport Fury 'vert
  






> To: 1962to1965mopars@xxxxxxxxxx
> From: Dodger7998@xxxxxxx
> Subject: 8 3/4 yokes
> Date: Thu, 15 Apr 2010 23:40:30 -0400
> 
> 
> 
> I need a refresher course on yokes,,,,,, as I remember there were two  
> different spline counts as well as large and small, anyone remember what went on 
>  what for what years?
> 
> --
> [Non-text portions of this message have been removed]
> 
> 
> ----
> Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
> 
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 
> 
> 
 		 	   		  
_________________________________________________________________
The New Busy think 9 to 5 is a cute idea. Combine multiple calendars with Hotmail. 
http://www.windowslive.com/campaign/thenewbusy?tile=multicalendar&ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_5


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER