Re: fuel pump rod
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: fuel pump rod




Jack, I don't know if this is your problem but I remember hearing a few years ago that there was a batch of bad fuel pump rods out there that weren't hardened properly. The problem was they would mushroom over and be very hard to remove.

Dan


----- Original Message ----- From: "Jack Cheek" <jcheek@xxxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Thursday, February 25, 2010 9:02 PM
Subject: fuel pump rod





hi all
any suggestion on how to remove a stuck fuel rod.i have soak it with p/b blaster.
no movement yet.havn't tryed heating it yet.
any thoughts .
thanks all
thanks jack
63 dodge polara 500.ht.446 with max wedge top end
65 dodge 440 convertible(motor not yet-- but maybe another max wedge)


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.