Re: Torqueflite adjustments
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Torqueflite adjustments




Yes it is adjustable from the outside.  I am not familiar with the floor
shifter procedure and am just guessing off the pushbutton procedure, but
were the shift cable enters the tranny case is a wheel with several holes in
it and a small bolt holding it to the case.  I bet it might not be too
different than the pushbutton procedure.  With someone holding the shifter
in reverse remove the small bolt and loosen the wheel about five or six
turns.  Pushing in on the cable tighten the wheel till it is snug to the
case. Then using the closest hole as # one in the wheel to the threaded one
in the case rotate the wheel clockwise five holes and reinstall the small
bolt.  That should be very darn close to right but as I said I am just
guessing on the floor shift procedure.  The transmissions are the same the
shifters are just different.  Any corrections or conformations will be
appreciated.

          
 Herb 
 
1956 Plymouth Belvedere 361
1959 Coronet 326 Poly
1963 Fury 2D/HT 6.1
1963 Sport Fury Convertible 361
1970 Challenger RT 440 - 4 Sale
1999 Durango SLT 5.9
2008 SRT-8 Magnum 6.1
St. Louis, MO.
 
http://1962to1965mopar.ornocar.com/mmo42009.html
  
 
 
 
-------Original Message-------
 
From: Butch Edison
Date: 1/17/2010 11:32:11 AM
To: 1962to1965mopars@xxxxxxxxxx
Cc: zephyr9900@xxxxxxxxxxx
Subject: Torqueflite adjustments
 
Herb, it will be weeks before I work on the transmission, but would like to
query you on another quirky thing about this torqueflite. It's a floor shift
 When I push the shift lever from 1st to 2nd, it does not shift until I push
the shift lever about 1/8" more. Same from 2nd to drive and drive to neutral
 Is this something I adjust outside the transmission? Thanks/Butch/Ferndale,
WA
 
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER





Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.