RE: K Frame Removal

[Don Owen <d4owe9@xxxxxxxxxxx>]

Rick: Do you have a Torsion Bar Remover Tool?

Your torsion bars are likely still in "tension" and will hold everything in place until you drive them out from the lower control arms. Check that out and you should be on your way. Hope that helps, Donny, 64 Belvedere


 
> To: 1962to1965mopars@xxxxxxxxxx
> From: rickgilmore66@xxxxxxxxxxx
> Subject: K Frame Removal
> Date: Mon, 14 Dec 2009 13:41:23 -0500
> 
> 
> 
> 
> 
> Ok, I thought my mechanical abilities would just let me breeze through removing my K Frame but I was wrong and at a stand still. Although I have read the online how to's I can't get past where I am now. I have the shocks, upper control arms off at the top, the torsion bar adjuster is loose as I can get it. The torsion bar clips are out in the back the bolts are off the front, the strut rod bolts are off, but I can't get the suspension to move enough to get the struts off. 
> 
> 
> 
> What do I need to do, do the struts come out next, if so how?
> 
> 
> 
> Rick Gilmore
> 
> '63 Fury
> 
> _________________________________________________________________
> Hotmail: Trusted email with Microsoft’s powerful SPAM protection.
> http://clk.atdmt.com/GBL/go/177141664/direct/01/
> --
> [Non-text portions of this message have been removed]
> 
> 
> ----
> Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> 
> 
 		 	   		  
_________________________________________________________________
Hotmail: Trusted email with Microsoft’s powerful SPAM protection.
http://clk.atdmt.com/GBL/go/177141664/direct/01/
--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER