Parts help for a NJ HS project
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Parts help for a NJ HS project




65 Coronet project being built for a HS class project. But there are a few parts that I need some help in locating. If anyone can help, I'd appreciate it. Either in pulling parts or finding one in a yard that's local to NJ...that would be a great big help.

Parts needed:

65 Coronet center grille section (some dings fine)
65 Coronet front bumper brackets
65 Coronet front bumper / rear bumper (straight, driver quality)
R & L (for the 65) Early B UCA mount/shock tower. Cut flush at frame and 1" around the welds, removed from the inner fender. the kids can drill the spotwelds at a later time.

We're going to TRY to build a A/FX car!

thanks
Mike

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.