Re: brake drums
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: brake drums




They're likely 'swedged' on. Meaning the wheel studs are stamped on the front side, flaring the stud out at the base which holds the drum onto the hub. 
Trying to beat the hub or studs out will ruin the drum by bending/warping it. You'll have to either cut or drill the heads off the the studs from the back and push them through the front. 

Mark 

----- Original Message ----- 
From: "MO ( Steve Mick)" <micher@xxxxxxxxxxxxxxx> 
To: 1962to1965mopars@xxxxxxxxxx 
Sent: Sunday, November 1, 2009 10:42:14 PM GMT -05:00 US/Canada Eastern 
Subject: brake drums 


Today I finished up the paint detailing and installation of all front 
suspension componets. I wanted to remove the drums from the hubs and just 
put the hubs on with wheels so I could move the car-64 Dodge. How the heck 
do you get the drums off the fron hubs??? I soaked everything with PB 
blaster and tried dropping the drum on concrete hoping that the hub would 
fall in , but no such luck. Any tricks to get them apart?.................MO 


---- 
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 

'62 to '65 Mopar Clubhouse Discussion Guidelines: 
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.