RE: Pentastar

[Paul Lennemann <pjlenn@xxxxxxxxx>]

I posted some photos here:  
http://s204.photobucket.com/albums/bb1/63mopar/Rust/
There are 4 pictures with captions explaining what they are etc. 
Restoration Specialties is sending me something, not sure what.  All I 
know is that I will have to alter them, which is no problem.  We'll see 
what they send when they get here in a few days.  I appreciate all the 
suggestions & help.  I'm sure with all of the resources available 
through this BB I'll find what I need.  And Herb, amazing.  Straight 
from Ma Mopar's mouth.

Paul L.
'63 Sport Fury
440/727
http://www.1962to1965mopar.ornocar.org/ml-lennemann63.html
Doug Daniel wrote:
> 
> can you  get a  couple of photos of the clips you need too us i have 
> loads =
> of nos parts=20
> 
> --- On Mon, 10/12/09, Paul Lennemann <pjlenn@xxxxxxxxx> wrote:
> 
> > From: Paul Lennemann <pjlenn@xxxxxxxxx>
> > Subject: Pentastar
> > To: 1962to1965mopars@xxxxxxxxxx
> > Date: Monday, October 12, 2009, 8:31 PM
> >=20
> > After having the rust repair done on my 63 SF I have to
> > re-locate my=20
> > Pentastar emblem.=A0 I measured Rich Kinsley's
> > placement, which was just=20
> > forward of centered between the wheel well opening and the
> > rear edge of=20
> > the fender.=A0 Seems to me that before the resto work,
> > mine was to the=20
> > rear of center.=A0 Was this an arbitrary
> > placement?=A0 This is a fairly=20
> > trivial thing given that my car is not a stock resto but
> > just the=20
> > same........
> > Also, I sent some molding clips to Restoration Specialties
> > for them to=20
> > match.=A0 I got a call today and they are unable to
> > match any of them.=A0=20
> > They had one which I will have to trim to fit, but can
> > anyone point me=20
> > to another vendor to try?=A0 I'm also getting some
> > things from Gary Goers=20
> > but he doesn't show these type clips in his catalog.
> >=20
> > Paul L.
> > '63 Sport Fury
> > 440/727
> > http://www.1962to1965mopar.ornocar.org/ml-lennemann63.html
> >=20
> >=20
> > ----
> > Please address private mail -- mail of interest to only one
> > person -- directly to that person.=A0 I.e., send
> > parts/car transactions and negotiations as well as other
> > personal messages only to the intended recipient, not to the
> > Clubhouse public address. This practice will protect your
> > privacy, reduce the total volume of mail and fine tune the
> > content signal to Mopar topic.=A0 Thanks!
> >=20
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html.=20
> >=20
> > =0A=0A=0A      


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.