can you get a couple of photos of the clips you need too us i have loads of nos parts --- On Mon, 10/12/09, Paul Lennemann <pjlenn@xxxxxxxxx> wrote: > From: Paul Lennemann <pjlenn@xxxxxxxxx> > Subject: Pentastar > To: 1962to1965mopars@xxxxxxxxxx > Date: Monday, October 12, 2009, 8:31 PM > > After having the rust repair done on my 63 SF I have to > re-locate my > Pentastar emblem. I measured Rich Kinsley's > placement, which was just > forward of centered between the wheel well opening and the > rear edge of > the fender. Seems to me that before the resto work, > mine was to the > rear of center. Was this an arbitrary > placement? This is a fairly > trivial thing given that my car is not a stock resto but > just the > same........ > Also, I sent some molding clips to Restoration Specialties > for them to > match. I got a call today and they are unable to > match any of them. > They had one which I will have to trim to fit, but can > anyone point me > to another vendor to try? I'm also getting some > things from Gary Goers > but he doesn't show these type clips in his catalog. > > Paul L. > '63 Sport Fury > 440/727 > http://www.1962to1965mopar.ornocar.org/ml-lennemann63.html > > > ---- > Please address private mail -- mail of interest to only one > person -- directly to that person. I.e., send > parts/car transactions and negotiations as well as other > personal messages only to the intended recipient, not to the > Clubhouse public address. This practice will protect your > privacy, reduce the total volume of mail and fine tune the > content signal to Mopar topic. Thanks! > > '62 to '65 Mopar Clubhouse Discussion Guidelines: > http://www.1962to1965mopar.ornocar.org/mletiq.html. > >