Turn Signal fix?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Turn Signal fix?




>  -------Original Message------- 
>  I put a replacement  turn signal cam in the '64 and am not entirely happy
>  with the operation - there  were two little wires (looked like bent
>  paperclips) that I had to trim to  length, then butt-splice the thing in.
>  Tightening the turn signal lever  screw tight enough to keep it from
>  vibrating loose results in stiff operation  and unpredictable cancelling,
>  not to mention that if the switch is not centered,  one brake light doesn't
>  work.
>  
>  Any better  fix?
>  
>  
>  SC


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.