RE: Another cam bites the dust

[Rich Kinsley <rlkinsley@xxxxxxxxx>]

I just switched to the VR oil. I haven't seen any shortage. Can we 
verify if it's discontinued? Darn it.

Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies

=====================================================================
Bill M wrote:
> 
> I spoke to a friend of mine lest night, and just a couple of starts
> after changing to diesel oil, he has wiped his cam. The motor is a 400
> punched and stroked to a 451? i think, and it does have a ~.600" cam
> w/ solid lifters...non-roller. He had the Valvoline VR Racing oil in
> it and changed it to the diesel oil because he couldn't find the VR.
> He has not driven the car since the change, just started it 2-3 times
> since changing the oil. After the new oil, it started sounding funny.
> He checked valve lash and one was really loose. He's going to switch
> over to a roller setup so he doesn't have to screw with this oil mess
> anymore.
> 
> He called the cam manufacturer and they said they continue to have
> issues w/ the new oils, and the zinc in the diesel oils is going to be
> reduced even more soon. Time to stock up in the VR when you can find
> it I guess!
> 
> -- 
> Bill M
> 65 Coronet 500 'vert http://1962to1965mopar.ornocar.com/mmo62008.html
> 73 Dart Sport, 00 Cherokee, 01 Dakota



Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.