Re: dash mounted rearview mirror

[Dodger7998@xxxxxxx]

how about one of those wrenches that plumbers use to reach up and tighten  
the faucett hold down nuts
 
 
In a message dated 8/8/2009 3:24:10 P.M. Central Daylight Time,  
62pluckedchicken@xxxxxxxxx writes:


All  the Cresent wenches I've looked at are way to bulky (even with the 
radio  removed),, I can't seem to find an offest or open end wrench that  
big

I did order a 1-3/8 inch socket from Sears, but I didn't pay  attention 
it's 12 point, instead if 6 point.. 

I sprayed the nut  with BP Blaster hoping it would soften up enough to 
turn by hand, but no  luck (maybe I'm just a weeny ;)

spigot2039@xxxxxxxxxxx wrote:
>  
> How about a long-handled crescent wench?  Or an extra deep  offset 
> wrench?
> 
> Another option is to remove the radio  so you have a better access. Last 
> resort. 
> 
>  Thanks,
> Gary H. 
> 
> -----Original  Message-----
>  
> >here's some pics of my  frustration...
> >
>  >http://www.timelesstransport.com/dashpad-install/
> >
>  >Rich Kinsley wrote:
> >> 
> >> You're good with  pictures. Can you send a pic of the area? I was 
> >> thinking  they might have a tool like you use on doors to use for the 
> >>  mirror. I think maybe you could make one from some 1/8" steel? It'd 
be  
> >> an interesting challenge. Also if you have that socket maybe  you 
could 
> >> cut a thin piece from the socket and have it  welded to a thin piece 
of 
> >> steel. Let's see what it looks  like. I always like to make custom 
tools 
> >> :-)
>  >> Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies  


----
Please address private mail -- mail of interest to only  one person -- 
directly to that person.  I.e., send parts/car transactions  and negotiations as 
well as other personal messages only to the intended  recipient, not to the 
Clubhouse public address. This practice will protect  your privacy, reduce 
the total volume of mail and fine tune the content signal  to Mopar topic.  
Thanks!

'62 to '65 Mopar Clubhouse Discussion  Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.  



**************A Good Credit Score is 700 or Above. See yours in just 2 easy 
steps! 
(http://pr.atwola.com/promoclk/100126575x1222846709x1201493018/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072&hmpgID=115&bcd
=JulystepsfooterNO115)

[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.