go too a mopar dealer ask for them there for mopar P3-6P 14mm 3/8 reach --- On Tue, 8/4/09, Rich Kinsley <rlkinsley@xxxxxxxxx> wrote: > From: Rich Kinsley <rlkinsley@xxxxxxxxx> > Subject: Spark plug question > To: 1962to1965mopars@xxxxxxxxxx > Date: Tuesday, August 4, 2009, 4:14 PM > > > > Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies > > I have had problems finding spark plugs that fit and work. > I just don't > want Champions and the good Autolite 75's are not made > anymore from what > I see. The Autolite 85's are a different heat range and > just don't work > as well. The problem with my engine is the reach. The 75's > and 85's are > 3/8" reach (.375). I had tried some others and carefully > turned the > engine bt hand and I found the domed pistons hit the > electrod and bent > it. I don't need to ventilate my pistons! > > Here's what I spotted at Summit. E3 spark plugs with .375 > reach , one > designated as #ETP-E3-12 and the other as #ETP-E3-14. They > are $2 each > right now. Ther is also a .307 reach #ETP-E3-16. I think > they sound like > they'd work. Would the "12" be the coldest?? I was thinking > of trying > them. > > Gary P, et al, got any input??? > > > ---- > Please address private mail -- mail of interest to only one > person -- directly to that person. I.e., send > parts/car transactions and negotiations as well as other > personal messages only to the intended recipient, not to the > Clubhouse public address. This practice will protect your > privacy, reduce the total volume of mail and fine tune the > content signal to Mopar topic. Thanks! > > '62 to '65 Mopar Clubhouse Discussion Guidelines: > http://www.1962to1965mopar.ornocar.org/mletiq.html. > >