Sweet ... a local Dodge dealer had one for $12 ... Now I need to figure out how to get what's left of the old one out of the hole in the block. It appears to be in there pretty solid. I've tried a few different things of varying diameter, coming up from underneath and trying to tap it up but haven't had any success. The hole seems like it is tapered from top to bottom - in any event the hole at the bottom of the block seems to be a lot smaller than the one at the top, but might just be an optical illusion. Any ideas? I don't want to mess up the hole at all. Perhaps an easy out ? Thanks in advance, Brian ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.