Re: How difficult - Front suspension rebuild
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: How difficult - Front suspension rebuild



Call ESPO for your kit and your rear sporing www.espo.com

Very helpful and good prices too. I buy all my suspension stuff from them.

With a ball joint socket, a ball joint stud removal tool (harbor
freight), pickle forks (harbor freight), impact gun, breaker bar, rust
penetrant, and a BFH, you can do the front end yourself...it's just
not that hard at all.

-- 
Bill M
65 Coronet 500 'vert
http://1962to1965mopar.ornocar.com/mmo62008.html

On Wed, May 27, 2009 at 10:47 PM,  <62pluckedchicken@xxxxxxxxx> wrote:
>
> that is so great of you guys :)
>
> Let me call Bill Rolick tomorrow..see when I can get the kit and we'll
> set up a day to have a suspension party!


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.