Re: drive shaft swap

[Dan McCormack <mcwheels@xxxxxxxxxxxxxx>]

According to the books I have:

All B body 62 Dodge and Plymouth models were on a 116" wheelbase including 
the wagon.

All 63, 64 and 65 B body Plymouths were still 116" wheelbase.

63 and 64 B body Dodges were 119" wheelbase except the wagon which was 116"

65 B body Dodge wagon was 116" but in one place it says the other models 
were 117" and in another place it says they were 119"?

Dan


----- Original Message ----- 
From: "Gary H." <spigot2039@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Thursday, April 30, 2009 4:07 PM
Subject: Re: drive shaft swap


> Does the '62 wagon have the same wheelbase listed in the '62 Dodge FSM? 
> Seems I recall the wheelbase was listed there....
>
> Thanks,
> Gary H.
>
> -----Original Message-----
>
>
> > ok I found the auto hobby digest ball-n-trunion driveshaft interchange.
> >  <http://www.autohobbydigest.com/bntboot/interchange.html>
> >
> > they list 62 Dodge B-body 318/727 as 53 3/4"
> > I have to assume the same for the wagon,, cuz they don't list it.
> > and the 63 Dodge B-body SW 318/727 listed, is 53 3/4"
> >
> > 64 Plymouth B-body 318/727 is 53 7/8"
> >
> > so now there's only an 1/8" difference. hmm
> >
> > can I safely assume that the small difference in length won't matter?
> >
> > maybe this is kind of a dumb question but just wanted to make sure.
> >
> > thanks
> > Schuyler
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.