Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies I finally got the double flare made on my trans line and it is a very nice flare at that. It took me two days to accomplish this believe it or not! We did my TTI headers faster than that. Ask Paul. I could not keep the tube from slipping in the holder. Now I have 4 new flare tools. Three are the "best" I could find and the other is a Harbor Freight cheapy. I finally took two of them, filed the inner side of the clamp slightly so they would come together tighter. They still slid so I positioned one correctly and put a second clamp about an inch or more behind the first and bolted them together so there was two clamping surfaces. This worked like a charm and I finally can install the trans cooler line. Whew! ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.