RE: Chrome stick-on paper
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Chrome stick-on paper



Jeff,

I have been using Bare Metal Foil for years on models. It comes in 6" x 
11 1/2" sheets. There are 3 that may be of use to you, Chrome, Ultra 
Bright Chrome, and Matte Aluminum. It can be used to repair bezels and 
face plates on the dash. I would not use it on any item that you touch 
as it is more cosmetic, but can be buffed. There is a brush on adhesive 
for addition holding power if needed.

Nick Tiberio




   
Jeff Adams wrote:
> 
> I read about something called bare-metal foil on another Mopar site. 
> It's supposed to be a chrome-like self adhesive paper that works good
> on small trim pieces like dash trim. I found some in the hobby store 
> last nite... it looked like silver painted paper to me! No way does this 
> 
> stuff look ANYTHING like chrome! It was over $6 for a 4" x 8" sheet, 
> too. Anybody ever use anything like this with good results?
> 
> Jeff Adams
> 64 Polara



furyus63


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.