Re: Breaking loose Ball Joints

[Herb <zephyr9900@xxxxxxxxxxx>]

http://americanmuscle.carshopinc.com/product_info
php/products_id/96914/23000BE

      
 Herb 
 
1959 Coronet 326 Poly
1963 Fury 2D/HT 6.1
1963 Sport Fury Convertible 361
1970 Challenger RT 440
1999 Durango SLT 5.9
2006 300-C Heritage 5.7
2008 SRT-8 Magnum 6.1
St. Louis, MO.
 
http://1962to1965mopar.ornocar.com/mmo42009.html
  
Only 2 defining forces have ever offered to die for you....Jesus Christ and
the American Soldier.
One died for your soul, the other for your freedom. 
 
 
 
-------Original Message-------
 
From: Bill
Date: 4/4/2009 8:12:58 AM
To: mml@xxxxxxxxxxxxxx;  62-65 Mopar List
Subject: Breaking loose Ball Joints
 
Anyone have any little tricks for getting ball joint shafts to pop out
of the spindle or lower control arm? I was working until midnight last
night to no avail. I soaked the hell out of them, used pickle forks,
beat on the control arm and spindle to jar it loose, and beat on the
ball joint stud w/ a brass drift...nothing! Is there some sort of a
puller I could buy because nothing is budging right now!!
 
--
Bill M
65 Coronet 500 'vert http://1962to1965mopar.ornocar.com/mmo62008.html
73 Dart Sport, 00 Cherokee Sport, 01 Dakota SLT,
21 Model T, 92 Accord, 06 Mazda #
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER