Rich 64 Belvedere----- Original Message ----- From: "Steven Charette" <stevec@xxxxxxxxxxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx> Sent: Thursday, July 23, 2009 11:23 PM Subject: RE: Fuel system remake
Rich, I'm trying to remember where I saw them, but someone is making thefuel line clips (for along the inner side of the sill area) in 3/8" now... Ithink it was R/T Specialties in PA. SC -----Original Message----- From: Rich Kinsley [mailto:rlkinsley@xxxxxxxxx] Sent: Thursday, July 23, 2009 11:19 PM To: 1962to1965mopars@xxxxxxxxxx Subject: Fuel system remake Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies Here's another fine mess I got myself into! I have a 25' coil of 3/8" fuel line and the old one is laying on the floor by it. I'm trying to match it up but that ain't easy! It's going OK and if the tricky bends at the ends don't work out I'll just terminate them in braided line. I'm not gonna do the old run the braided line all the way trick. I have a few small kinks in a couple tight bends but I really don't think they'll hurt the flow. Wish me luck. ---- Please address private mail -- mail of interest to only one person --directly to that person. I.e., send parts/car transactions and negotiationsas well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. ----Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!'62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.