RE: what camshaft?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: what camshaft?



  or just knok out the roll pin and take off the automatic shifter arm ,,,,i for my 65  383  got a crane cam  called a fireball cam came with lifters  but this was back in the 80s  i think they were another company that  went tits  up  recently 

--- On Thu, 7/23/09, victim1234 <victim1234@xxxxxxxxxx> wrote:

> From: victim1234 <victim1234@xxxxxxxxxx>
> Subject: RE: what camshaft?
> To: 1962to1965mopars@xxxxxxxxxx
> Date: Thursday, July 23, 2009, 1:28 PM
> 
> HEY Bob, your best bet is to find a automatic column as in
> the engine
> compartment will still have the shifter levers still on the
> steering column.
> 
> -----Original Message-----
> From: incoming.verizon.net [mailto:moweepea@xxxxxxxxxxx]
> 
> Sent: Thursday, July 23, 2009 1:15 PM
> To: 1962 1965
> Subject: what camshaft?
> 
> 
> Hi all, I have a couple of questions. First I want to
> change my column shift
> 
> to a floor shift. Does anyone know where I can find a
> sleeve that goes on 
> the column to eliminate the  sleeve that had the
> shifter? And I want to put 
> in a camshaft in my 383, engine is stock but I want a
> little more HP., and 
> not a lot of vacuum loss. Any ideas? Thanks, Bob 
> 
> 
> ----
> Please address private mail -- mail of interest to only one
> person --
> directly to that person.  I.e., send parts/car
> transactions and negotiations
> as well as other personal messages only to the intended
> recipient, not to
> the Clubhouse public address. This practice will protect
> your privacy,
> reduce the total volume of mail and fine tune the content
> signal to Mopar
> topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> 
> 
> ----
> Please address private mail -- mail of interest to only one
> person -- directly to that person.  I.e., send
> parts/car transactions and negotiations as well as other
> personal messages only to the intended recipient, not to the
> Clubhouse public address. This practice will protect your
> privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> 
> 
> 
> 
> 
> 





Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.