RE: new electronic distributor problems

[Herb <zephyr9900@xxxxxxxxxxx>]

Yes, bypass it!  Your system needs 10 or11v to operate to it's full
potential and it is only getting 6 or 7v through the ballast resister.  I am
sure you will see a difference.

         
 Herb 
 
1956 Plymouth Belvedere 361
1959 Coronet 326 Poly
1963 Fury 2D/HT 6.1
1963 Sport Fury Convertible 361
1970 Challenger RT 440
1999 Durango SLT 5.9
2006 300-C Heritage 5.7
2008 SRT-8 Magnum 6.1
St. Louis, MO.
 
http://1962to1965mopar.ornocar.com/mmo42009.html
  
 
 
 
-------Original Message-------
 
From: laborboy@xxxxxxxxxxxxx
Date: 07/19/09 17:59:52
To: 1962to1965mopars@xxxxxxxxxx
Subject: RE: new electronic distributor problems
 
I did not bypass my ballast resistor--are you recommending that?
  Thank you for the guidance and advice.
 
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER