Tapered Axle Hub Puller
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Tapered Axle Hub Puller



Hello,

If anyone is looking for a puller for the tapered axle hubs here is the 
one I found:

http://www.rimactools.com/storefront/ProductDetail.asp?varSessionID=645174341&varIgnoreMC=&Prd_ID=0151&Cat_Name=Pullers


Not very  big compared to the old style pullers but it works great on my 
63 Sport Fury.

Just big enough to bolt up on 3 studs, tightened the puller bolt and 
gave is a wack on the end of the puller bolt and off came the hubs.

If the link did not come through it is a Rimac #0151.

Dennis C.

1996 Dodge Ram 3500 Van Conversion
1964 Plymouth Belvedere 318 Auto
1963 Plymouth Sport Fury 383 4-speed
1949 Dodge Pickup 289/C4 soon to be changed
1998 Honda Valkyrie Standard


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.