RE: mini starter heat shield
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: mini starter heat shield



I used a Versa shield 7X24 Summit #DEI-010402. It was $26 a few years 
ago. I have a Summit mini-starter. My starter is sooo tight that I had 
to wiggle it in like dental floss. It seems to work well but it is 
cooked now quite badly and I'm thinking of getting another. At least it 
fit OK. Anything bigger would've been a no-go me thinks.

Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies

=====================================================================
Brian Safford wrote:
> 
> Anyone have a recommendation for a heat shield for my mini-starter?
> 
> Thanks,
> Brian
> '62 Dart 440 4-Door/Poly 318



Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.