Re: oil pan fitment

[Brian Safford <hzf9vv@xxxxxxxxx>]

${top_text_ad}
I got that part ... it's the "what do I set it on, how hard to I hit
it, etc., etc., etc. ..." part that I'm worried about.  I only have 1
oil pan :-)

Would a 2x4 (or similar) be an appropriate thing to do this on?

Do I want the holes to be flat or a bit in the other direction?

Thanks,
Brian

On Tue, Jul 7, 2009 at 4:21 PM, victim1234<victim1234@xxxxxxxxxx> wrote:
> ${top_text_ad}
> What about a BFH?????
>
> -----Original Message-----
> From: Mr Christopher [mailto:MrChristopher1@xxxxxxxxxxx]
> Sent: Tuesday, July 07, 2009 3:33 PM
> To: 1962to1965mopars@xxxxxxxxxx
> Subject: Re: oil pan fitment
>
>
> Ball peen hammer...
>
> Christopher Glick
>
>
> ----- Original Message -----
> From: Brian Safford <hzf9vv@xxxxxxxxx>
> To: 1962to1965mopars@xxxxxxxxxx
> Sent: Tue, 7 Jul 2009 19:29:03 +0000 (UTC)
> Subject: oil pan fitment
>
> I'm getting some leakage around the rubber seals in the front and rear
> of my oil pan.
>
> All the pan holes have been pushed in by the pan bolts; I'm wondering
> if a simple fix is to flatten those out?
>
> I don't have a vice (sp?) or anything resembling one, so am a bit
> unsure how to go about flattening those out, so some MacGyver-like
> suggestions are welcome :-)
>
> Thanks in advance,
> Brian Safford
> '62 Dart 440 4-door / Poly 318
>
>
> ----
> Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
> ${bottom_text_ad}
> ----
> Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>
>
>
>
>

${bottom_text_ad}
----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.

This email was sent to: ${recipient}

u/?bUrDWg.${encoded_sub_id}.${EMC}