Herb, is it necessary to change to a new coil, or will a stock Mopar coil work with this unit? > I used the Igniter 1381A kit & 40011 Flame-Thrower coil on my 63 same > for > your 64. > >          > Herb > > 1956 Plymouth Belvedere 361 > 1959 Coronet 326 Poly > 1963 Fury 2D/HT 6.1 > 1963 Sport Fury Convertible 361 > 1970 Challenger RT 440 > 1999 Durango SLT 5.9 > 2006 300-C Heritage 5.7 > 2008 SRT-8 Magnum 6.1 > St. Louis, MO. > > http://1962to1965mopar.ornocar.com/mmo42009.html > > > > > -------Original Message------- > > From: Butch Edison > Date: 6/30/2009 12:43:45 PM > To: 1962to1965mopars@xxxxxxxxxx > Subject: Re: Installing Elec Distributor in 64 Dodge > > > > > Good message thread here. I'm going to be putting an electronic > distributor > in one of my 64 Sport Furys soon, 383cid. I see that Pertonix offers 3 > versions and I don't know which to choose. My car will be a street car > only, > would appreciate any advice as to which model to buy. Thanks in advance. > > > > Butch/ Ferndale, WA > > > > [Non-text portions of this message have been removed] > '64 Belvedere Davenport, Iowa "The difference between ordinary and extraordinary is that little extra." ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. This email was sent to: arc.6265@xxxxxxxxxxxxxx u/?bUrDWg.bSONJP.YXJjLjYy ?p=TEXFOOTER