Re: another electrical question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: another electrical question



Add the fusible link; use the same as in the original '65.

Thanks,
Gary H. 

-----Original Message-----
 
>Does it hurt to add a fusible link evn though that certain year might
>not have used them??
>    I have a 1964 and 1965 barracuda wiring diagram in front of me.
>The chart shows no fusible link at the starter relay for 1964 but it
>does for 1965.
>  should I add one in or just leave as is??
>   they have some at the local parts store, but my concern is that
>because i have stepped up this circuit to 10ga. wire rather than the
>original 12ga. wire  it will be hard to judge what size fusible link
>to insert.  The guy at the parts store said u choose  his links by the
>gauge of the wire the original was in, SO ,he only has the stock
>12ga. wire/links.
>     and also if i inserted the 12ga fusible link wont this  create a
>restriction at that point  as well.
>  sorry i know this is a little confusing
>  neal zimmerman, eugene oregon


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.