Paul, what are you using for gas and are you having any detonation? Are yor new pistons at 0 deck height and are they flat tops? Are those 906 heads at the stock combustion chamber cc's or been milled? My build will be similar to yours with the 906 heads, but will be a 413. Thanks ....................MO.........sw iowa ----- Original Message ----- From: "Paul Lennemann" <pjlenn@xxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx> Sent: Monday, June 22, 2009 11:50 AM Subject: RE: Attencion 440 Experts
My 440 is a 73 or 74. It had stock 906 heads on it and had been warmed up a bit by the previous owner (cam & intake). I put in a set of KB pistons which bumped the compression to @ 10:1 and had the heads ported. The increased compression REALLY woke that motor up. So make sure that is in your plan. (note: my stock pistons were @.140" down in the hole.) Paul L. '63 Sport Fury 440/727 http://www.1962to1965mopar.ornocar.org/ml-lennemann63.html killerjay rodskie wrote:I picked up a 1972 Imperial La Baron,,i hope i made a good choice. I wish to take out the 440 and get it in a machine shop, put in bigger Pistons, a good cam along with a t.chain set, and a nice valve job. I will try for headerss, a 750 holly, rebuilt 727 with a 2800 stall speed I'd like to put this set up in my 65 this winter and start driving it in spring. Gent's,,hows my plans so far,,and is there anything i should change, do or not do, or for that matter look out for. Up here everythings Chevy or Ford,,i wish to show these boys that Old Mopars not only look dam good but their also a killer street machine. Thanks, Jay Rod. Nice 65 Dodge Coronet 500Paul L. '63 Sport Fury 440/727 http://www.1962to1965mopar.ornocar.org/ml-lennemann63.html ----Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!'62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.
---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines:http://www.1962to1965mopar.ornocar.org/mletiq.html.
Back to the Home of the Forward Look Network