Re: input shaft diameters
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: input shaft diameters



the reason i wonder is i am looking for a hydraulic throwout bearing
setup and wonder about the inside diameter.
    I know a guy here that has an almost new  Mcleod  throwout for
sale but he doesnt know if it was a regular or hemi box  it came from.


On 2/21/09, john althaus <althausjbl@xxxxxxx> wrote:
>
>
> As I understand it, they both can use the same input bearing, either a 307
> or a 308 depending on the main case, so I would assume the diameter is the
> same.  My question would be "why do you ask" the bearing retainer can be of
> a
> different  diameter where it fits into the bell housing. There are at least
> 3
> different  ones that I know of.
>
> John  Althaus
> 64 Savoy Hemi  4spd
> Lewisville,  TX 75077
> 214-673-7540 cell
>
>
> In a message dated 2/21/2009 10:43:04 A.M. Central Standard Time,
> neal.zimmerman@xxxxxxxxx writes:
>
> does any  body know if a regular B-body 4 speed has the same diameter
> input  shaft  as the hemi B-body 4 speed.  I know the sp lines  are
> different , but i am wondering about  the actual shaft  diameter.
> neal zimmerman, eugene  oregon
>
>
> **************You can't always choose whom you love, but you can choose how
> to find them. Start with AOL Personals.
> (http://personals.aol.com/?ncid=emlcntuslove00000002)
>
> [Non-text portions of this message have been removed]
>
>
> ----
> Please address private mail -- mail of interest to only one person --
> directly to that person.  I.e., send parts/car transactions and negotiations
> as well as other personal messages only to the intended recipient, not to
> the Clubhouse public address. This practice will protect your privacy,
> reduce the total volume of mail and fine tune the content signal to Mopar
> topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>
>


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.