RE: Very long time no post...but have a question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Very long time no post...but have a question




Layne,

I got it this time!  If no one can help you here try Bouchillon Performance
they are good at pulley setups.

http://www.bouchillonperformance.com/

Herb
St. Louis, MO.

-------Original Message-------
 
From: lgrissman@xxxxxxxxx
Date: 2/16/2009 11:09:01 AM
To: 1962to1965mopars@xxxxxxxxxx
Subject: RE: Very long time no post...but have a question
 
We have already put Aluminum heads on it, added TTI Headers, new cam,
new pistons, and completely rebuilt the thing, as well as bored it out
..040"  Didn't want to go the full .060", Just want to have the right
pullets to finish it all up.....I hope someone will be able to help me
out on this one....
 
 
Rich Kinsley wrote:
>
>
> Sorry I can't help with your questions but regarding your 413 I think
> alot of the guys have them. Why not, it's a good engine. George punched
> his out .060" and wound up with 426. Enjoy it.
> Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
> =====================================================================
> Layne wrote:
> >
> >
> > Hello Everyone, It's been over a year since I've been able to post and I
> >
> > am
> > back working on my 64 Polara...I have a question for anyone who can
> > help....
> >
> > Can someone recommend the best aftermarket pulleys and belts that match
> > factory for our engine?  If you have an answer to this, do you have part
> > numbers to the pulleys that you may have used in the past or present?
> >
> > The engine is a 413 (I know it's not what is supposed to be in there,
> > but it
> > came with the car when we got it years ago).
> >
> > Thanks in advance for all of your help...
> >
> > Layne Grissman
> > '64 Polara
> >
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER





Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.