re how to remove wheel

[D&B Baker <dickens@xxxxxxxxxxxxx>]

first remember one side is left other is right hand thread. That said nut splitter won't likely work due to wheel design,depth of nut. Take vise grips and hold stud so it won't spin use 1/8 drill bit at two points of nut. Then go a size bigger ,once drilled on two opposite sides should be able to split them with a chisel. Only other choice as said before is torch.
 Doug b.
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.