Re: Ignition Timing Tab
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Ignition Timing Tab



My later LA motors have the timing marks cast right into the timing
chain cover. As far as I know the marks are always on the pass side on
an A & LA motor.

I'll try and take some pics to post somewhere tonight to show the difference.

Bill M
65 Coronet 500 'vert

On Mon, Jan 19, 2009 at 7:51 PM, Gary H. <spigot2039@xxxxxxxxxxx> wrote:
>
> Is the poly like a \6 in that there are different timing tabs that can bolt to the left or right, depending on the harmonic balancer used?
>
> Gary H.
>
> -----Original Message-----
>>I'll look @ the other cover but I think they are the same. This tab
>>I'm talking about actually bolts to the front of the water pump via
>>the bottom 2 bolts.
>>
>>Bill M
>>65 Coronet 500 'vert


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.