Re: 88 318 cam specs?

[sean dietz <dietz_diggler@xxxxxxxxx>]

http://www.allpar.com/mopar/318.html here's a link to a page on allpar with the cam specs for the 2bbl and 4bbl through 88 and the roller cam fuel injection unit. I believe you have the latter, but am not sure. There's also some other good information on your engine, regardless of which one you have. The cam specs are about 3/4's of the way down the page. Hope this helps and that you had a merry Christmas. God bless.
Dietz


--- On Fri, 12/26/08, chymar01@xxxxxxxxxxx <chymar01@xxxxxxxxxxx> wrote:

> From: chymar01@xxxxxxxxxxx <chymar01@xxxxxxxxxxx>
> Subject: 88 318 cam specs?
> To: 1962to1965mopars@xxxxxxxxxx
> Date: Friday, December 26, 2008, 5:27 PM
> Anybody know the cam specs for an '88 318? 
> 
> Thanks 
> Mark 
> 
> [Non-text portions of this message have been removed]
> 
> 
> ----
> Please address private mail -- mail of interest to only one
> person -- directly to that person.  I.e., send parts/car
> transactions and negotiations as well as other personal
> messages only to the intended recipient, not to the
> Clubhouse public address. This practice will protect your
> privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 


      


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.