RE: cutting a hood for scoop install
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: cutting a hood for scoop install




Jimmy Peavy wrote:
> 
> I always used a lump of clay stuck to the bottom side of the hood.
> Use a aircleaner stud, long enough to poke into the clay when the hood 
> is closed. Not too long.
> Presto, the centerline  of the hole is set.
> 
>    Jimmy
> ==================================================================

Heck, use some long ones, sharpen them and slam the hood.
Presto, pilot holes :-)



Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.