Re: cutting a hood for scoop install

[Jimmy Peavy <peaver63@xxxxxxxxxxxxxx>]

I always used a lump of clay stuck to the bottom side of the hood.
Use a aircleaner stud, long enough to poke into the clay when the hood 
is closed. Not too long.
Presto, the centerline  of the hole is set.

  Jimmy

Gary H. wrote:

> http://www.moparmax.com/tech/2007/ii_12-string-1.html is an interesting article on how to cut a hood for 2x4 max hood scoop installation. This topic has come up here before, and this is the first article I've seen showing one way to do that install.
>
> Gary H.
>
>
>  


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.