Re: shift cable headaches

[Ted Albin <ted_albin@xxxxxxxxx>]

${top_text_ad}
i dont know what its doing but make sure the valve body isnt cracked losing pressure.



----- Original Message ----
From: Paul Lennemann <pjlenn@xxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxx
Sent: Friday, August 29, 2008 8:42:26 PM
Subject: shift cable headaches


I'm having two headaches in getting the S.F. back on the road.  The 
shift cable adjustment and header bolt coolant leaks.  I can recite the 
cable adjustment procedure in my sleep and I have fudged it a hole or 
three each way from the initial setting with no luck.  I'm really 
resisting dropping the pan.  Tomorrow I'll get my lovely assistant to 
help me and I'm going to start from scratch.
I took your advice Don, and got some hi-temp RTV plus copper.  And I've 
gotten a couple sealed but the one I did tonite immediately started 
leaking.  Should I let it sit overnite perhaps before I start the 
engine?  
I took it on a short shakedown cruise and the improvement is dramatic. 
It feels really strong.
It is basically an "Old Reliable" build except for the cam as I kept the 
Isky I was running previously.

Paul L.
'63 Sport Fury
440/727
http://www.1962to1965mopar.ornocar.org/ml-lennemann63.html


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopa------------

${bottom_text_ad}
----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.

This email was sent to: ${recipient}

u/?bUrDWg.${encoded_sub_id}.${EMC}