Jim Altemose wrote: > > Anyone seal their own gas tank with a kit? How do you get all of the > liquids out at each stage? > > I pulled the tank from the '63 Dodge Polara 500 (383) I picked up in > December. It's all original. I'm replacing the fuel pump and sending > unit, so I decided while I was at it I'd run 3/8 line instead of 5/16. > I was planning on having the tank done at the radiator shop, but when > I got it out I was amazed at the great condition it's in. A couple of > teeny surface rust here and there but for the most part after a little > water and wiping, it looks like new. The undercoating is still great, > and the original pad on top is still great. So, I decided to just > coat the inside myself. > > But I had trouble getting just the water out. It doesn't run out the > filler neck at all and I have to slosh it around a lot to get it out > the sending unit hole. I tried stuffing a piece of PVC down the > filler neck figuring theres a flap or valve, but it's still difficult > to get all the water out. > > My concern is getting out the sealing liquids. First there's metal > wash. Then muriatic acid. Then metal etcher. Then acetone. Then > the sealer. I'd like to get out each liquid in a controlled fashion. > Some are caustic and some can be saved for future use. > > Thanks. > > - Jim > Jim Altemose, Long Island, NY > '63 Polara 500 (Max Wedge) > '63 Polara 500 (383) > '65 Belvedere I (Street Wedge) > '71 Bronco The filler neck can be pulled out. There's just a rubber grommet that seals it to the tank. You might be able to pour the liquids then. If the seal is a little hard or sort of bonded to the neck with age, new ones are available. Paul L. '63 Sport Fury 440/727 http://www.1962to1965mopar.ornocar.org/ml-lennemann63.html ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.