Re: molding removal

[Schuyler Wrobel <sky62@xxxxxxxxxxxxx>]

Brian, in one of the last chapters on 'Body and Sheet Metal'
there should be a paragraph or two about the grill (removal/ 
intsallation).
I don't have my book in front of me, but as I recall the lower ss  
grill surround
pieces, there's a small square piece in the center, held on by a nut,  
you can get to
from behind. some of the push-on clips you can get to from behind also.
a stiff bladed putty knife and a rag or piece of wood to pry on may  
help.

hope this helps or maybe you figured it out already...

Schuyler
62 Dodge Dart 440 wagon w/ Poly 318
 <http://www.1962to1965mopar.ornocar.org/ml-wrobel62.html>
FYI - I Do the Decal designs for the Poly head 318 and more! email me  
with your needs -
 <sky62@xxxxxxxxxxxxx>



On Jul 1, 2008, at 6:26 AM, Brian Safford wrote:

> How the heck do you remove molding on a 62 Dart 440?  I'm trying to
> remove the grill so I have better access to install my electric fan.
> I have the service manual and it doesn't have anything about molding
> removal.
>
> Apologies if this info is on the website - I'll go check there now :-)
>
> Regards,
> Brian Safford
> '62 Dart 440


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.