Re: 727 TF question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 727 TF question




Yes, as long as you have a slip yoke output housing and shaft.
The flanged output shaft will also swap, but it's a;ot less desireable.


    Jimmy

Brian Safford wrote:

I'm starting my 413 build and I know my existing 727 won't bolt up to
it.  My existing 727 works great - was recently rebuilt and I
installed a Transgo shift kit.  I also have a Lupo 2800 stall
converter.

If I can acquire a big block cable-shift housing, will all my existing
parts swap in with no problems?

Thanks in advance,
Brian Safford
'62 Dart 440



----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.