Re: Replacement pulley

[Leslie Thrasher <redred1@xxxxxxxxxx>]

Brian, I had the same problem in my 62 Dart w/413.  I just put it in front
of the radiator.
----- Original Message ----- 
From: "Brian Safford" <hzf9vv@xxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Monday, June 30, 2008 3:18 PM
Subject: Replacement pulley


> I have an electric fan I'd like to install in my '62 Dart, but after
> removing the fan there is still not enough room between the pulley and
> the new fan assembly.  There is a short shaft that sticks out that
> interferes with the new fan assembly.
>
> Is there another pulley I can get?  Or can / should I grind off that
shaft?
>
> Also, do I need to consider upgrading to a new alternator?
>
> Thanks in advance,
> Brian Safford
> '62 Dart 440
>


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.