RE: Correct fuel line?

[Pat Herman <dart1962_440@xxxxxxxxx>]

To be honest Jim, I don't remember if it was Inline or Fine Lines.  I'd 
recommend asking about the bends when ordering unless you are at a show 
like Carlisle or the Nats where you can inspect the lines at the time of 
purchase.

Pat


Jim Altemose wrote:
> 
> Thanks Pat.
> 
> Did you purchase the 'flat' 3/8 from Inline Tube?
> 
> - Jim
> 
> On Thu, Jun 19, 2008 at 6:38 PM, Pat Herman <dart1962_440@xxxxxxxxx> 
> wrote:
> >
> > I went with 3/8 for the ability to upgrade from a 361HP to something
> > bigger down the road in my 62 Sport Fury.  I noticed the larger line
> > flattens out a lot in the 90 bends - not sure if there is a real benefit
> > vs. the 5/16 because of this...
> >
> > Pat
> >
> 
> - Jim
> Jim Altemose, Long Island, NY
> '63 Polara 500 (Max Wedge)
> '63 Polara 500 (383)
> '65 Belvedere I (Street Wedge)
> '71 Bronco


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.