Sean B wrote: > > Got no responses to this, so it must have stumped the carb guys on the > list. Here is how I fixed it: I removed the carb and flipped it, then > sprayed carb cleaner through the nipple. The barest trickle came out. > Took out my biggest Sherlock Holmes magnifying glass. Turns out the > casting was bad, and this hole wasn't drilled out. Drilled it out, > works like new now. Letting everyone know in case they come across this > > in the future. >=================================================================== Atta Boy! I wouldn't have a clue so that's the way to do it. Sometimes we surprise ourselves with what we figure out. Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.