Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies I finally have my car all back together in preperation for the dyno-tune on Tues.. I tried to fire it up and it wasn't getting any fuel. The carbs are bone dry as I just did some big mods to them and the lines were pretty drained. So I took the lines apart and used a funnel to fill everything back up as much as possible. I got the carbs full and the accelerator pumps finally started squirting. So I tried again and sure enough it started and ran great! Now I'm pleased. I also cut the carpet away from under the gas pedal which helped alot but I still think I need more throttle opening. I have the cable as tight as possible without affecting the idle setting. Maybe I'll have to Bend the pedal a bit? ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.