Re: Flaming River Steering Column

[Dan McCormack <mcwheels@xxxxxxxxxxxxxx>]

That's interesting Sean because Mopar tilt steering columns were made by 
Saginaw. If you put a custom steering wheel on a Mopar tilt column they take 
a GM adaptor. Been there and done that a couple of times.

Dan


----- Original Message ----- 
From: "Sean B" <polecat2@xxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, May 14, 2008 10:08 AM
Subject: RE: Flaming River Steering Column


> About three years ago I called them about this column, as they
> advertised it in a few magazines as a "Mopar specific tilt steering
> column".  I called them, and found out it was their GM column, and I had
> to modify the column and harness to fit into a Mopar.  There was nothing
> "Mopar specific" about it at all.
>
> However, they since may have developed a real Mopar column.  If you call
> them, press them on this, and what modifications you will need to
> perform.
>
> Their products are, however, supposed to be excellent quality.
>
> Sean


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.