Re: RE: Starter Relay
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: RE: Starter Relay




hi mopar folks
i have a 63 dodge polara 500 that im redoing hope to have it going this fall.440 max wedge top end.
i have a 67 r/t and a 65 charger convertible.these cars do need to be redone for sure.how ever the 65 has had a lot more work done to it .the 67 is still waiting.im going to finish the 63 and im going to sale the other two.its going to take more time than im willing to do.so im going to finish the 63.
if anyone you know might want a project to do these two cars can and should be put back on the road.email me anyone if you want.
thanks 
jack 

----- Original Message -----
From: v8magic@xxxxxxxxxxxxx
Date: Wednesday, April 9, 2008 6:09
Subject: RE: Starter Relay
To: 1962to1965mopars@xxxxxxxxxx

> 
> Sorry! It appears that the links only bring up the empty search mode.
> 
> 
> 
> v8magic@xxxxxxxxxxxxx wrote:
> > 
> > 
> > Take a look at this link: 
> > 
> http://www.napaonline.com/MasterPages/NOLMaster.aspx?PageId=430&CatId=15&SubCatId=2> 
> > 
> > 
> > Click on the words "starter relay" and you can compare via 
> photos. By 
> > the way, ECH parts are definitely better than the MPE parts. 
> > 
> > NAPA parts listings have improved over time, but they are 
> still very 
> > difficult to use in way too many instances. You have to be 
> creative. For 
> > 
> > example, if I look up a part for a '64 Fury, I may not find it 
> listed. 
> > But, if I look up the same part for a '64 Belvedere, Bingo! 
> There it is! 
> > 
> > Here is the link for a '65 Valiant: 
> > 
> http://www.napaonline.com/MasterPages/NOLMaster.aspx?PageId=430&CatId=15&SubCatId=2> 
> > 
> > 
> > Good hunting!
> > 
> > Bob in Sacramento
> > 
> > 
> > 
> > Todd Huffman wrote:
> > > 
> > > I believe I have a starter relay that mounts on the firewall 
> going or 
> > > gone bad.  I went to Napa to see if they carry them but 
> he could not 
> > > find it in their computer.  He pulled out a big catalog 
> but we still had 
> > > 
> > > 
> > > a hard time.  Does anyone know the part number?  I 
> pulled it off the car 
> > > 
> > > 
> > > and will take it in but there is no part number on it that I 
> can see.  
> > > 
> > > Todd - 1965 Plymouth Belvedere II
> 
> 
> ----
> Please address private mail -- mail of interest to only one 
> person -- directly to that person.  I.e., send parts/car 
> transactions and negotiations as well as other personal messages 
> only to the intended recipient, not to the Clubhouse public 
> address. This practice will protect your privacy, reduce the 
> total volume of mail and fine tune the content signal to Mopar 
> topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> --
> 

--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.