Re: Bleeding brakes

[Gary <mopar413@xxxxxxxxxxx>]

I think the maybe you have a bad new MC.  If you bled the MC before installing then I almost has  to be a bad MC.  
---- "Don H." <mopar4me@xxxxxxxxxxx> wrote: 
> 
> Rebuilt usually = bad.  If possible get a new one  or get the old one sleeve 
> in brass or stainless and put your own kit in it.
> ----- Original Message ----- 
> From: "Jeff Adams" <ledman_70@xxxxxxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Saturday, April 05, 2008 9:30 AM
> Subject: Bleeding brakes
> 
> 
> >
> > I just installed a rebuilt master cylinder in the 65 Dart yesterday and
> > I can't pump the brakes up to bleed them. The old mc worked, but
> > sometimes the pedal would go to the floor, then pump back up. Bled the
> > brakes, no air, so I figured it was the mc. The new lone won't even pump
> > up at all. Bench bled it per instructions first,no bubbles. Had the wife
> > helping me. If I plug the mc with the supplied plug the mc will build
> > some pressure, but as soon as I attach the line it looses all pressure.
> > I don't seen any leaks and like I said, the brakes worked before. I'm
> > thinking bad mc.....any other opinios? What am I missing?
> > Thanks
> >
> > Jeff Adams
> > 64 Polara
> >
> >
> > ----
> > Please address private mail -- mail of interest to only one person --  
> > directly to that person.  I.e., send parts/car transactions and 
> > negotiations as well as other personal messages only to the intended 
> > recipient, not to the Clubhouse public address. This practice will protect 
> > your privacy, reduce the total volume of mail and fine tune the content 
> > signal to Mopar topic.  Thanks!
> >
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html.
> >
> > 
> 
> 
> ----
> Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> 
> 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.